YAMAHA MARINE SERVICE MOZAMBIQUE

Yamaha Pumps Enduro Powered

Yamaha Pump ECP50

Introduction ECP50

Driven by Yamaha’s 5.5hp air-cooled OHV engine. The ECP50 couples a Banjo® thermoplastic pump, designed for discharging and pumping corrosive liquids (liquid-fertilisers) and soapy fluids.

Specifications

Engine
4-Stroke Yamaha MZ175-A2B 4.1KW 5.5 HP With Automatic Low Oil Protection System
Pump Banjo (Thermoplastic)
Outlet 50mm, 2in
Inlet 50mm, 2in
Total Head 33m
Volume Litres/MIn 750 ltr per minute
Solids na pressure bars 3,3bar
Hose Length na
Unique Features Able to Handle Corrosive Liquids e.g. Fertilizer, Salt water


Yamaha Enduro Pump EFFP50

Introduction EFFP50

This high-pressure pump with 2-inch inlet and three-way outlets is capable of approximately 3 bars of pressure, through a closed type, cast aluminium housing with two-vaned brass impeller.

Specifications

Engine
4-Stroke Yamaha MZ175-E2, 4,1 KW / 5,5HP With Automatic Low Oil Protection System
Pump QP205S
Outlet 1 X 38 mm, (1,5in), 2 X 25 mm (1in)
Inlet 50 mm, (2in)
Total Head 75 m
Volume L/M 400 ltr per minute
Solids N/A
Pressure Bars 7,5 bar
Unique Features: Self Priming Up To 8m At Sea Level. Delivery Via 3 Way Outlet. Powered by Yamaha Reliability, Housed In a Protected Cradle Frame.

Yamaha Enduro Pump EFFP75TW

Introduction EFFP75TW

Coupled to a closed type, twin -brass/bronze impeller, lightweight aluminium cast housing, energised by the Yamaha 5.5hp engine. This is a super 9-bar pressure pump, forcing 470 litres of water per minute at 95 meters total delivery head. Perfect for firefighting.

Specifications

Engine
Type OHV Yamaha (5.5hp) air cooled -MZ175 (E2) straight shaft / thread
Max Power (net) 3.5kW @ 3600r/min
Rated Power (net) 3.0kW @ 3600r/min
Fuel capacity 4,5 Litre fuel tank – splash type lubrication
Dimension and weight 730mm X 510mm X 620mm - 65kg
Starter Recoil / T.C.I ignition
Fuel/Oil type Unleaded fuel / Automotive detergent oil - 10W30- SAE Grade - API SE rating or higher
Pump QP-305SLT - Closed type, twin impeller aluminium cast with
brass/bronze impeller
Pressure Approx 931kPA

Yamaha Enduro Pump EFFP100B

Introduction EFFP100B

A medium pressure, high volume flow pump driven by our Yamaha 12hp engine. Adjoined to a closed type, aluminium cast housing a single impeller. Capable of 1400 litres per minute.

Specifications

Engine

Type OHV Yamaha (12Hp) MZ360 (A2B) - Straight shaft / parallel keyed

Max Power (net) 7.6kW @ 3600r/min
Rated Power (net) 6.3kW @ 3600r/min
Fuel capacity 6,7 Litre fuel tank – splash type lubrication
Dimension and weight 830mm X 500mm X 630mm - 100kg
Starter Recoil / T.C.I ignition
Fuel/Oil type Unleaded fuel / Automotive detergent oil - 10W30- SAE Grade - API SE rating or higher
Pump QP-40T - Open type - cast iron - two vane impeller & volute casing
Pressure Approx 235kPA

Yamaha Enduro Pump EP50H

Introduction EP50H

Powered by Yamaha’s MZ175 5.5hp, 4-stroke engine with recoil starter. This 2-inch inlet and on-way outlet, 3.3 bar pressure pump is suitable for general purpose and water transfer. Fitted with Nitrile seals.

Specifications

Engine

4-Stroke Yamaha MZ175-A2B 4.1KW/5.5HP With Automatic Low Oil Protection System and Balance Shaft for Smooth Operation

Pump HYMECH
Outlet 50mm, 2in
Inlet 50mm, 2in
Total Head 33m
Volume litres/min 640 ltr per minute
Solids N/A
Pressure Bars 3.3 bar
Hose Length N/A
Unique Features Fitted with Nitrile Seals and O-rings for Pumping Oils and Paraffin Diesel Fuel
Supplied Complete With Fittings and Suction Pipe Sieve
Housed In a Protective Cradle Frame

Yamaha Enduro Pump EP75

Introduction EP75

This pump is suitable for water transfer, and fitted with Nitrile seals and O-rings for pumping oils and paraffin. The protective cradle frame prevents damage to the pump and allows easy handling. The ideal pump for general purpose use.

Specifications

Engine

4-Stroke Yamaha MZ175-A2B 4.1KW/5.5HP With Automatic Low Oil Protection System and Balance Shaft for Smooth Operation

Pump Hymech
Outlet 75mm, 3in
Inlet 75mm, 3in
Total Head :28m
Volume Litres/Min 1 140 ltr per minute
Solids N/A
Hose Length N/A
Unique Features Fitted with Nitrile Seals and O-rings for Pumping Oils and Paraffin Diesel Fuel
Supplied Complete With Fittings and Suction Pipe Sieve
Housed In a Protective Cradle Frame

Yamaha Enduro Pump ETP75

Introduction ETP75

Built for tough dewatering and trash pumping, the ETP75 is capable of handling solids such as debris, sand and small stones.

Specifications

Engine

Type OHV Yamaha (10hp) air cooled MZ300 (A2B/AAIA0) - straight shaft / parallel keyed
Max Power (net) 7.0kW @ 3600r/min
Rated Power (net) 5.8kW @ 3600r/min
Fuel capacity 5,8 Litre fuel tank – splash type lubrication
Dimension and weight 740mm x 520mm x 620mm - 76kg
Starter Recoil / T.C.I ignition
Fuel/Oil type Unleaded fuel / Automotive detergent oil - 10W30- SAE Grade - API SE rating or higher
Pump QP-302T - Open type - cast iron - two vane impeller & volute casing
Pressure Approx 265kPA

Yamaha Enduro Pump ETP100

Introduction ETP100

A high-flow and heavy solid handling trash pump that can handle stones, debris, and other waste solids up to 38mm. Discharging through 100mm outlet at 1650 litres per minute.

Specifications

Engine

Type OHV Yamaha (12Hp) MZ360 (A2B) - Straight shaft / parallel keyed

Max Power (net) 7.6kW @ 3600r/min
Rated Power (net) 6.3kW @ 3600r/min
Fuel capacity 6,7 Litre fuel tank – splash type lubrication
Dimension and weight 830mm X 500mm X 630mm - 100kg
Starter Recoil / T.C.I ignition
Fuel/Oil type Unleaded fuel / Automotive detergent oil - 10W30- SAE Grade - API SE rating or higher
Pump QP-40T - Open type - cast iron - two vane impeller & volute casing
Pressure Approx 235kPA

Yamaha Enduro Pump YP20C

Introduction YP20C

A fully imported Yamaha durable and reliable, 2-inch water pump is confident in delivering up to 620 litres per minute. Maximum operating time of two hours from a 3.6 litre tank.

Specifications

Engine

4-stroke, OHV, Forced air cooled
Fuel capacity 3.6 Litre
Dimension (L,W,H) mm 489 x 387 x 391
Starter Recoil starter
Rated output 3.1kW (4.2PS) / 3,600rpm
Fuel/Oil type Unleaded fuel
Pump
Max delivery volume 620L/min
Connection Thread
Outer Pipe Thread