|
DIMENSIONS
|
OVERALL LENGTH :
|
2395 mm
|
|
OVERALL WIDTH :
|
1200 mm
|
|
OVERALL HEIGHT :
|
1789 mm
|
|
WHEEL BASE :
|
1640 mm
|
|
MINIMUM GROUND CLEARANCE :
|
110 mm
|
|
FRONT WHEEL TREAD :
|
870 mm
|
|
REAR WHEEL TREAD :
|
980 mm
|
POWER SUPPLY/DRIVE TRAIN
|
MOTOR :
|
Hitachi 48-volt high-efficiency, shunt wound motor with
internal solid state tachometer
|
|
OUTPUT RATING :
|
3.5 hp (2.6 kW) for 30 minutes
|
|
MOTOR CONTROL UNIT :
|
Yamaha-built solid state microprocessor with high-efficiency
MOSFET switching. 270 amp armature output, 20 amp field
output
|
|
TRANSAXLE :
|
EnduraDrive™ direct coupled transaxle equipped with high-precision
helical gears, 12.49:1 drive axle ratio
|
|
BATTERIES :
|
Six 8-volt Trojan T875 Batteries (std), Eight 6-volt Trojan
T105 Batteries (opt)
|
|
CHARGER :
|
Yamaha-built automatic microprocessor-based high frequency
switching regulated charger with I.E.I.-type charging profile,
an industry first. 17 amp DC max output at 48 volts, 9.5
amp 120 volt AC. Underwriters Laboratories (U.L.) Listed.
C.S.A. Certified
|
CHASSIS
|
FRAME :
|
HybriCore™ Chassis features a robotic welded automotive
ladder-style steel frame mated to a polypropylene structural
floor. Frame is protected with a multi-step full-immersion
phosphate treatment, electro-deposition epoxy-based coating,
and a electrostatic applied polyester/urethane powder topcoat
|
|
BODY :
|
Custom-formulated thermoplastic olefin, painted with a two-part
topcoat of high-luster automotive grade polyurethane
|
|
STEERING :
|
Self-compensating double reduction helical rack-and-pinion,
permanently lubricated with sealed bearings and greaseless
tie-rod ends
|
|
FRONT SUSPENSION :
|
Tru-Trak II™ fully independent automotive-style strut suspension
|
|
REAR SUSPENSION :
|
Unit swing arm with coil springs over hydraulic shock absorbers
|
|
BRAKES :
|
Maintenance-free internal transaxle disc brake
|
|
SEATING :
|
Seamless, fabric-backed vinyl bonded to pure, virgin foam
contoured seat cushions and mated to a warp and moisture
resistant polypropylene bottom, strengthened with plated
steel inserts
|
|
BUMPERS :
|
Front and rear 5 mph energy-absorbing bumpers
|
PERFORMANCE
|
MAX FORWARD SPEED :
|
24 km/h
|
|
MAX REVERSE SPEED :
|
8.1 km/h
|
|
MININUM TURNING RADIUS :
|
2.8 m
|
GENERAL
|
DRY WEIGHT :
|
270 kg
|
|
TYRE SIZE :
|
18.00 x 8.50-8.00 (4-ply rating)
|
|
SEATING CAPACITY :
|
4 persons
|
|
|
